In short
ContractorBear’s March 2026 Tucson article calls November through February a freeze-concern season, because winter nights drop below freezing more often than people expect, with pipe bursts described into December through February. HomeAdvisor’s burst-pipe guide, updated June 20, 2026, lists repair at $200–$3,000, average about $500. Thawing is a flat fee around $100 on that page. An emergency call-out is $100–$300. None of that is a Sabino Creek price. The form is a callback, and a licensed contractor sets any visit. Checked October 19, 2026.
Why this page exists in a desert city
People move here from hotter assumptions. A hose bib on a north wall, a washing-machine line in an unheated garage, or a vacant house with the heat left off can still freeze on a clear night. ContractorBear is the source for the season: November–February as the freeze-concern window, and the observation that nights go below freezing more often than the city’s reputation suggests. We are not adding a temperature record they did not print, and we are not claiming a number of emergency calls.
The same night is often when the furnace or heat pump is asked to work for the first time since spring. That visit is before the first cold night. A house that was empty for months has both problems at once: snowbird startup for the heating equipment, and this page if a faucet is dry or a ceiling is wet. Say which one you are looking at.
What the National Weather Service actually dates
ContractorBear’s season note is still the source for “November through February” as a concern window. The dated averages are the National Weather Service Tucson office, 1991–2020, on weather.gov/twc/SEAZ_freezedates, checked November 9, 2026. Tucson’s average first freeze is December 3 and the average last freeze is February 7. The same table’s historical span for Tucson runs from an earliest first freeze of October 16, 1899, to a latest first freeze of January 25, 1978, and from an earliest last freeze of December 27, 2009, to a latest last freeze of May 3, 1899. Oracle, on that table, averages November 15 and April 4. A foothill yard or a wash can frost when the airport does not. We are not publishing a count of burst pipes.
EPCOR’s Arizona freeze page is a utility checklist, not a Tucson Water rule and not our instruction sheet. It lists keeping heat on in the house, disconnecting outdoor hoses, and letting a faucet drip during a cold spell. HomeAdvisor’s prevention list is already above. If water is running where it should not, shut the main off first. Where that valve usually sits is the main shutoff. The same night’s heater is a heat pump cold snap or no heat. Both sit on the winter hub.
If the pipe has already opened
HomeAdvisor’s burst-pipe guide, updated June 20, 2026, tells you to shut off the main water supply, open faucets so the lines drain, and shut off electricity in the wet area if you can do it safely. Then call a plumber. A hardware-store repair kit, listed around $25 on that page, is a temporary wrap while you wait, not a finished repair. We are a referral, so the “call a plumber” step is the form, after the water is off. If you smell gas near a heater that also froze, leave and call 911 or Southwest Gas. Do not hunt for the leak with the lights.
What HomeAdvisor lists for the repair
Labor is most of the bill. HomeAdvisor says nearly 80 percent of an average $500 repair is labor, with plumbers at $45–$200 per hour, or a flat fee of $100–$1,250, plus a possible trip fee of $50–$300. Thawing frozen pipes is listed as a flat fee around $100. If you want someone immediately and cannot make a temporary stop, an emergency call-out may add $100–$300. That add-on is not a promise that anyone is available at 2 a.m. This site does not claim overnight coverage.
| Location or type | HomeAdvisor average cost, including labor |
|---|---|
| Any burst, normal range | $200–$3,000 (about $500 average) |
| Kitchen or inside a wall | $150–$500 |
| Bathroom | $150–$800 |
| Basement | $200–$600 |
| Main line | $150–$2,000 (about $1,080 average) |
| Sewer pipe that burst | $1,300–$4,700 (about $2,250 average) |
Material, before labor, is a small part of that. HomeAdvisor lists PVC at $0.50–$8 per foot, copper at $2–$15, and cast iron at $10–$30, and says that once labor is included a badly corroded run can land around $150–$250 per foot. A house built before 1986 may still have older pipe. We will not tell you from a ZIP code which material you have.
Prevention HomeAdvisor actually printed
On that guide, the prevention list is: keep the thermostat at least at 55°F when you are away, let a faucet run so water moves, open cabinet doors on exterior walls so room air reaches the pipes, and use heat tape where a pipe is exposed. Those are national tips from HomeAdvisor, not a Tucson building code we are quoting. They matter most in a house that will sit empty through a cold snap. The heating side of leaving a house is the snowbird page. The plumbing side is whether the water is off or the heat is high enough that an exposed line does not freeze.
A leak that shows up with no cold night behind it — a warm floor, a bill that climbed in summer — is not this page. That is slab leak detection or an ordinary supply leak. A water heater that itself froze is uncommon indoors. HomeAdvisor’s replacement guide says a heater can freeze if it is exposed, and that outdoor units need freeze protection. If your heater is in an open carport, say so.
Source
HomeAdvisor, “How Much Does a Burst Pipe Repair Cost,” updated June 20, 2026: homeadvisor.com/cost/plumbing/repair-burst-pipe. Season: ContractorBear, March 2026, contractorbear.com/plumber-lead-generation-tucson.